CS AUTOMATISME PAN · EIA · خدمة AUTO

نتحكمو، ننسقو وoptimize industrial processes

AUTO هي خدمة الأتمتة الصناعية ف EIA. كتصمم هندسات التحكم، كتطور برمجيات PLC وHMI، كتدمج أجهزة القياس والمحركات، كتأسس الاتصال الصناعي وكتواكب المصادقة والتشغيل.

التصميمالوظائف وهندسة التحكم
ProgramPLC، HMI، المحركات والواجهات
ValidateFAT وSAT والتشغيل
AUTO · الأتمتة الصناعية

أتمتة مصممة للمشغلين، فرق الصيانة وأهداف الإنتاج

نظام الأتمتة خاصو يتحكم فالعملية، يعرض حالات تشغيل واضحة، يوفر تشخيصات مفيدة ويبقى قابل للصيانة طول دورة حياتو. AUTO كتنظم التصميم الوظيفي، البرمجيات، الواجهات والاختبارات حول هاد الأهداف.

The service covers machines, special equipment, production lines, process utilities and modernization projects. Robotics is coordinated with MRE, while SCADA, MES, historization and traceability are coordinated with the industrial computing scope of EIA.

التحكم الوظيفيModes, sequences, interlocks, permissives, alarms and recovery behavior.
PLC وHMIStructured programming, reusable objects, screens, alarms and diagnostics.
الدمج الميدانيI/O، القياس والتجهيزات، المحركات، الحركة، الكاميرات والشبكات الصناعية.
دورة الحياةFAT، SAT، التشغيل، النسخ الاحتياطية، الدعم، التحديث والترحيل.
القدرات الأساسية ديال AUTO

منطق التحكم، تفاعل المشغل والاتصال الصناعي

These three layers are engineered together so that equipment behavior, human interaction and data exchanges remain coherent and testable.

PLCطبقة التحكم

برمجة PLC وهندسة التحكم

التحليل الوظيفي للمكونات، هندسة البرنامج، أنماط التشغيل، التسلسلات، آلات الحالات، التعشيقات، الأذونات، الإنذارات، التشخيص، بنيات المعطيات وتدبير مراقب للمصادر.

SiemensSchneider ElectricRockwell AutomationBeckhoffWAGOIEC 61131-3

إنشاء برمجيات تحكم منظمة وقابلة للتشخيص متماشية مع المتطلبات الوظيفية المعتمدة وأهداف قابلية الصيانة.

خدمات هندسة PLC
HMIOperator layer

HMI، الإنذارات والتشخيص

تصميم شاشات التشغيل، التنقل، الأوامر، عروض الحالة، عرض الإنذارات، الوصفات على مستوى الآلة، المنحنيات، صفحات الصيانة وإرشادات التشخيص.

Operating screensالإنذاراتTrendsالتشخيصMachine recipes

Provide operators and maintenance teams with clear information, controlled commands and actionable diagnostics.

خدمات هندسة HMI
COMطبقة الدمج

القياس، المحركات والاتصال

Integration of local and remote I/O, sensors, instruments, drives, motion control, machine vision interfaces and industrial communication between equipment and higher-level systems.

ProfinetProfibusEtherNet/IPModbus TCPCANopenOPC UAIO-Link

تنسيق الإشارات، الأجهزة والبروتوكولات عبر واجهات موثقة، سلوك واضح عند الأعطاب واختبارات مراقبة.

خدمات الدمج
خدمات AUTO

خدمات الأتمتة طول دورة حياة نظام التحكم

The scope can cover a focused programming assignment or a complete sequence from functional analysis to commissioning and support.

01

التدقيق وتحليل النظام الحالي

تقييم PLC وHMI وI/O والمحركات والشبكات وملفات المصدر والنسخ الاحتياطية والوثائق ومشاكل التشغيل المعروفة.

  • مراجعة الهندسة والجرد
  • Obsolescence and risk analysis
  • Modernization recommendations
02

التحليل الوظيفي

تحديد أنماط التشغيل، التسلسلات، الانتقالات، التعشيقات، الأذونات، الإنذارات، الإجراءات اليدوية والتشغيل المتدهور.

  • Modes and sequences
  • التعشيقات وشروط السماح بالتشغيل
  • استراتيجية الإنذارات والاسترجاع
03

هندسة نظام التحكم

Selection and organization of controllers, local and remote I/O, networks, HMI, drives, instrumentation and interfaces.

  • هندسة PLC وI/O
  • Network and interface definition
  • مدخلات اختيار المكونات
04

تطوير برمجيات PLC

Structured development of machine and process logic, reusable objects, sequences, diagnostics and communication functions.

  • Structured PLC programs
  • Reusable equipment objects
  • Version and backup management
05

تطوير HMI

Operator interfaces, commands, status, alarms, navigation, trends, machine recipes and maintenance diagnostics.

  • Screen and navigation design
  • ضبط الإنذارات والمنحنيات
  • صفحات التشخيص
06

المحركات والحركة

ضبط ودمج محركات السرعة المتغيرة، أنظمة السيرفو، المحاور، التموضع وتسلسلات الحركة.

  • ضبط معاملات المحركات
  • التحكم فالمحاور والتموضع
  • Motion diagnostics
07

واجهات القياس والرؤية الصناعية

Integration of sensors, measurement devices, remote I/O, identification systems and industrial camera interfaces.

  • Sensor and instrument integration
  • RFID / Barcode / IO-Link
  • Vision-system interfaces
08

FAT وSAT والتشغيل

Preparation and execution support for control-system tests, I/O checks, sequence validation and production start-up.

  • FAT / SAT
  • فحوصات I/O وحلقات القياس
  • دعم التشغيل
09

Migration and retrofit

استبدال مراقب لأنظمة PLC وHMI وI/O والمحركات والاتصال المتقادمة مع تحويل موثق وتخطيط للتراجع.

  • Program conversion strategy
  • ترحيل المعدات والواجهات
  • تحويل مراقب
منهجية مشاريع AUTO

مسار مضبوط من حاجة العملية حتى بداية الإنتاج

The method maintains traceability between functional requirements, software, interfaces, test evidence and released backups.

Process and existing-system analysis

Qualification of operations, modes, equipment, signals, controllers, interfaces, constraints and expected performance.

Process needsOperations, sequences, users and expected outcomes.
الأتمتة الحاليةPLC، HMI، I/O، المحركات، الشبكات وملفات المصدر.
الواجهاتMachines, instruments, robots, SCADA and external systems.
Project baselineScope, assumptions, responsibilities and acceptance goals.
الأسئلة المتكررة

Understanding the AUTO service

ناقش مشروع AUTO ديالك

نبنيو أتمتة يفهمها المشغلون وتقدر فرق الصيانة تدعمها

Present your process, equipment, current control system, interfaces, operating constraints and expected results. Our team will identify the relevant design, programming, testing and commissioning activities.

تواصل مع فريق AUTO